|
| |
Vertical PTO Pumps Designed for 3 categories of use
90-180 HP
-
Designed for larger herds utilizing big tractors with high
horsepower
-
Agitators and controls are hydraulically operated
-
Eight inch manifold delivers highest column and pressure for agitation and
tank filling
-
New rotary spout and valve with tee on top of manifold provides double
outlet for remote pumping and loading packs
-
Oil filled beam protects bearings and seals, keeps oil level above
slurry, stuffed beam requires minimum of oil
-
Seals in solid steel holder are lubricated from floor level, seal
holder protects shaft from wrapping
Option: top agitator spout for deep pits or large open top pits
- 60-100 hp STANDARD SERIES - for dairy, hog or beef pits (450 OR
1000rpms)
- agitator controls manually operated
- two point hitch, trailer mount, or stationary rail mount
- six inch manifold with impressive fill times
- rotating manifold and low level flex spout to agitate bottom solids/ top
crust
- seal block, outside bearing, 3 seals (run on hardened sleeve) grease line to
top
- Handling pits 6 to 12 feet deep
- equivalent to the Magnum Commercial
- rugged 1000 rpm PTO drive line
- 20 inch impeller housing
- full hydraulic controls for trailer lift, beam tilt, beam slider, horizontal
agitator rotation, vertical agitator control, shut-off control, fill valve
control
- agitator controls manually operated
- standard beam, manifold and housing
Option : Double Agitator
- 60 - 110 hp
- for smaller high liquid systems, smaller pumping holes 20-30 inches)
- manual rotation of manifold
- manual vertical control of agitator nozzle
- seals run on hardened sleeve
Option: turbojet top agitator (2nd)
HYDRAULICALLY DRIVEN...
Prop Agitator / Pump on a skid steer
- Telescoping boom, handles pits up to 12 feet deep
- Agitator and pump easily mount on a beam, mounts easily to fast attach
olates
- Hydraulically driven operates off skid steer hydraulics
- Requires 15- 20 gpm or 25-30 gpm for maximum performance
|
